The Pitch Spacers set the pitch to drain water from the DrySnap System. The first row of brackets requires no spacers, the second row requires one spacer and the third row two spacers and so on . . . . .

When snapping spacers together, see directions for detail description. These spacers will be located on every joist between the bracket and the joist.
Suggested Price . . . $ 0.69.

Use with the DrySnap Deck System to begin a course of drain panels.  Typically one unit is need per deck level.  If you have two rectangular decks connected on different level, you will need one starter strip for each leve.  Each piece is 12' in length.

Suggested Price . . . $ 25.90

The DrySnap system in an easy way to create a great outdoor space under residential and light commercial decking. DrySnap installs beneath your decking and provides a dry, useful area . . . screened porch, storage area for lawn equipment or bikes.

The DrySnap system bascially consists of 5-component parts. The panels, starter channel, trim cap, joist bracket and pitch spacer. Please click link below for a .pdf on the installation process.  Each panel measures 8"x12' and is available in White only.

Suggested Price . . . $ 29

The DrySnap system in an easy way to create a great outdoor space under residential and light commercial decking. DrySnap installs beneath your decking and provides a dry, useful area . . . screened porch, storage area for lawn equipment or bikes.

The DrySnap system bascially consists of 5-component parts. The panels, starter channel, trim cap, joist bracket and pitch spacer. Please click link below for a .pdf on the installation process.

Each panel measures 8"x16' and is available in White only.
Suggested Price. . $ 38.00

Use the DrySnap Trim piece to close gaps between ledger board and panel channel for a neat finished look. See instructions for details. Each trim piece is 12 fee in length. Available in White only.

Suggested Price . . $ 10.00

When installing our DrySnap™, use this stainless steel screw to install a minimum of 8"flashing out from the ledger board. Flashing should extend past the gap between the first two deck boards. Each bag contains 50 screws recommended when securing to treated lumber.

Suggested Price . . . $ 16.90

When installing our DrySnap™, use this 3" stainless steel deck screw for securing joist brackets to deck's joist. Each bag contains 50 screws which are recommended for securing DrySnap™ to treated lumber.

Suggested Price . . . $ 17.90