Our finest traditional single bead copper 5" half-round gutter fabricated in 16oz. copper. Each section is 10 feet in length. Half round copper gutters 

When ordering gutter, please select Common Carrier as the shipping method. Due to length restrictions, UPS and FedEx can not deliver gutter and pipe.

Suggested Price . . .  $ 155.00

A traditional copper half round favorite! Our 16oz. copper 5" half round gutters are traditional bead style and offer a distinctive look over typical K Style gutter. Half Round gutters are used extensively in Europe and Canada. Each section is 20 feet in length. Minimum of four sections required per order.  
 

Ships by Freight 20' only in protective crating.

Suggested Price . . . $319.00

Ideal for fascia mounting standard 5" half round copper gutter systems manufactured in the US.  Ideal when installing copper gutters to a plumb fascia.  Recommended hanger spacing is 24" on centers.  Includes spring clip for attachment to half round bead.  See 'Related items' for alternative hanger choices when installing to slanted fascia, rafter tails, cornice fascia, or roof mounting.

-Use the plumb fascia every 24" on centers.
-Fits standard 5" half round copper gutters.

Suggested Price . . .  $ 27.00     (See discounted price below)
 

Use the 5" Copper #1 Circle with Spring Clip when installing copper half round gutter to slanted fascia, rafter tails or special hanging situations.  This assembly includes spring clip and a nut & bolt for attaching to the any of the six different copper shanks. Available Shanks include the #!1, #6, #10, #11, #12, #25 and #30. See 'Related items' for a selections of copper shanks that work with this hanger bracket.  Fits the standard 5" half round single bead copper gutter system.

Suggested Price . . . $ 19.00

If you have limited or no fascia boards one option is to use the 5" half round copper Rival Strap when installing 5" half round single bead copper gutter to the roof sheeting.  Ideal for situations where there is limited or no fascia board.  Recommended hanger spacing is 24" on centers.  Related hangers include #1 Circles with copper shanks.  See 'Related items' for hanger alternatives.  <BACKORDER STATUS>

Roof Mount applications
Fits 5" classic single bead half round copper gutters.

 Suggested Price . . . $ 19.00. 

Our finest heavy duty fascia mounting both European and Standard 5" Half Round copper gutter systems. Recommended hanger spacing is between 18" - 24" on centers. The heavy duty construction will handle heaviest of snow loads. Pre-drilled mounting holes for easy hanger installation. Each copper bracket weighs 411.37 grams. 

Use with our European Half Round gutter systems.
Ideal for plumb fascia mounting half round gutters.

Suggested Price . . . $ 30.00

Use for external corner joining of our 5" half round single bead half round copper gutter. The style is also know as traditional bead half round. Made from 16oz. high grade copper.  External 90º box style miter.  Use exclusively with our five inch 16oz. Half Round Single Bead gutter system.  See 'Related items' form matching compoents.

90º Outside/External Corner Piece

Suggested Price . . . $ 67.00
 

Use for internal corning joining of 5" half round single bead copper gutter.  Fits to the outside of two sections of gutter meeting at an inside order.  Made from 16oz. high grade copper. 

90º Inside/Internal Corner Piece

Suggested Price . . . $ 67.00

Use for joining five inch half round copper gutter to three inch plain round or round corrugated copper downspout.  One required per downspout assembly. Narrow flange catches bottom of half round gutter's profile for a proper fit to the gutter system's downspout.  Made from 16oz. copper.  See related items for matching parts.

Fits 5" Half Round Gutter to 3" Round Downspout

Suggested Price . . . $ 20.00

Use with our 3" plain round copper downspout. Made from 16oz. copper.  Each elbow is 75º bend. Two required per downspout assembly. A third may be used at bottom of downspout.  Crimped for easy installation.  Also available in 30º, 45º, 60º and 90º bends.  See 'Related items' for matching components.

Bend = 75º

Suggested Price . . . $ 23.00

Use with our 3" plain round 16oz. copper downspout.  This 90º bend elbow is ideal for sharp turns.  The most common elbows used are the 75º bends; however the 90º bend can be effective in certain downspout scenarios.  Special order item can take up to 2 weeks. Made from 16oz. copper.

3" Plain Round Profile
This elbow has a true 90º Bend

Suggested Price . . . $ 23.00

Recommended for downspout offsets.  Two elbows are typically required per offset assembly.  Use with our 3" plain round copper leader made from the same 16oz. copper.  See 'Related items' for similar elbows and components.

Bend = 30º

Suggested Price. . . $ 23.00

Use the Ornamental Metco Copper Pipeband is for attaching 2" x 3" and 3" x 4" copper downspout to wall.  Made from 16oz. copper. Two required per single story downspout. A third may be used on a two story downspout. Size is 16" x 1-3/4". Fabricated from 16oz. Copper.

Ornamental Copper Pipeband 16"

Suggested Price . . . . . $ 14.50