Use to bring downpipe from fascia overhang to the wall. Two elbows are required for each downspout assembly. A third may be used at the bottom. This elbow has a 75º bend with a square corrugated profile. Typically used with a standard 5" K Style gutter system in steel.  Also available in 30º, 45º, 60º and 90º bends.  Mill Finish.

Bend = 75º Bend (Standard)

Suggested Price . . . . . $ 7.00

Use our 2x3 Square Corrugated Paint Grip Steel Elbows for projects requiring Paint Grip steel.  No need to prime elbow before painting.  Elbows are ready to apply finish coat.  Also available in 30º, 45º, 60º and 90º Bends.  See 'Related items' for matching components.

Finish = Paint Grip Steel (pre-primed for paint)

Suggested Price . . .$ 14.00

Use three elbows per typical downspout assembly.  The "B" style elbow makes a sideways turn.  This elbow is fabricated from 26g Galvanized Steel with a Paint Grip finish.  No need for a primer coat.  This elbow is ready for finish coat.

Finish = Paint Grip (Ready for paint)

Suggested Price . . . $14.00

Use the 3" K Style "Lock-In" design outlet when attaching 5" K Style galvanized steel gutter to 2"x 3" downspout. Made from 26g galvanized steel.  See 'Related items' for other downspout sizes.  One required per downspout assembly.

Fits 5K Steel Gutter to 2x3 Downspout

Suggested Price . . . . . $ 7.19