A traditional copper half round favorite! Our 16oz. copper 5" half round gutters are traditional bead style and offer a distinctive look over typical K Style gutter. Half Round gutters are used extensively in Europe and Canada. Each section is 20 feet in length. Minimum of four sections required per order.  
 
Ships by Freight 20' only in protective crating.

Competitor Price . . . $419.20

Use for connecting two sections of 5" half round traditional bead and reverse bead gutter in both 16 oz. and 20 oz. copper. Makes installation a breeze. Use the #42D copper pop rivets to fasten gutter to slip joint. Not needed for miters or corner pieces.  May be sealed with Parbond® (See Sealants) or soldered.

Suggested Price . . .  $ 29.00

Ideal for fascia mounting standard 5" half round copper gutter systems manufactured in the US.  Ideal when installing copper gutters to a plumb fascia.  Recommended hanger spacing is 24" on centers.  Includes spring clip for attachment to half round bead.  See 'Related items' for alternative hanger choices when installing to slanted fascia, rafter tails, cornice fascia, or roof mounting.

-Use the plumb fascia every 24" on centers.
-Fits standard 5" half round copper gutters.

Suggested Price . . .  $ 28.00     (See discounted price below)
 

If you have limited or no fascia boards one option is to use the 5" half round copper Rival Strap when installing 5" half round single bead copper gutter to the roof sheeting.  Ideal for situations where there is limited or no fascia board.  Recommended hanger spacing is 24" on centers.  Related hangers include #1 Circles with copper shanks.  See 'Related items' for hanger alternatives.  

Ideal for Roof Mounting
Fits 5" classic single bead half round copper gutters.

 Suggested Price . . . $ 21.00

Use the 5" Copper #1 Circle with Spring Clip when installing copper half round gutter to slanted fascia, rafter tails or special hanging situations.  This assembly includes spring clip and a nut & bolt for attaching to the any of the six different copper shanks. Available Shanks include the #!1, #6, #10, #11, #12, #25 and #30. See 'Related items' for a selections of copper shanks that work with this hanger bracket.  Fits the standard 5" half round single bead copper gutter system.

Suggested Price . . . $ 19.00

Use this shank with our #1 Circle Copper Hanger bracket when installing to slated fascia or rafter tails.  One shank is required per hanger bracket. Allows half round gutter to hang plumb when installing directly to either slanted fascia or rafter end. Recommended spacing is 24" o.c.

Slanted Fascia Mounting shank  

Suggested Price . . .  $ 24.00

Requires a 5" or 6" #1 Copper Circle with Spring Clip, Nut & Bolt. Used when installing half round copper gutter. The #10 Copper Shank allows adjustable vertical hang on plumb fascia. Often used with tile and slate roofs with a high roof pitch.

Allow more vertical adjustment.  Steeper roofs with limited fascia.

Suggested price . . . . . $ 16.00

Use for external corner joining of our 5" half round single bead half round copper gutter. The style is also know as traditional bead half round. Made from 16oz. high grade copper.  External 90º box style miter.  Use exclusively with our five inch 16oz. Half Round Single Bead gutter system.  See 'Related items' form matching compoents.

90º Outside/External Corner Piece

Suggested Price . . . $ 67.00
 

Use for internal corning joining of 5" half round single bead copper gutter.  Fits to the outside of two sections of gutter meeting at an inside order.  Made from 16oz. high grade copper. 

90º Inside/Internal Corner Piece

Suggested Price . . . $ 67.00

Use for joining five inch half round copper gutter to three inch plain round or round corrugated copper downspout.  One required per downspout assembly. Narrow flange catches bottom of half round gutter's profile for a proper fit to the gutter system's downspout.  Made from 16oz. copper.  See related items for matching parts.

Fits 5" Half Round Gutter to 3" Round Downspout

Suggested Price . . . $ 20.00

The 3" plain round copper downspout is commonly used with the 5" or 6" copper half-round gutter systems.  They also be used with the 5" K-Style copper gutters for added architectural appeal.  Each leader is 10 feet in length and has crimped ends for easy installation. One downspout is typically required per single story downspout installation.  See 'Related Items' matching elbows, pipe straps similar components.

*Ship by freight only in a protective crate.

Suggested Price . . . $ 149.00  (See discounted price below)