Our fine traditional 5" K-Style copper gutter sections are fabricated from 16oz. copper.  The five inch gutter size is recommended for roof areas less than 2800 square feet. All gutter must be shipped in protective crating to insure highest quality.  Each gutter section is 20 feet in length.  Optional 2x3 or 3x4 size square corrugated type downspouts will work with this gutter size.  Please see ‘Related items’ for matching components.

Ship by Freight 20' Only; Requires Protective Crate.

Suggested Price . . . . . . $ 359.00

Use for joining sections of 5" K Style copper gutter. Makes installation a breeze with no special cutting required. Made of 16oz. copper. Use the #42D copper pop rivets to fasten gutter to slip joint. May be sealed with Parbond® (See Sealants) or soldered.

Joins 5K Copper gutter sections on same plane.

Suggested Price . . .  $ 33.00

Great hanger for installing any 5" K-Style copper gutter system. Our recommended hanger spacing is 24" on centers. This brass hanger bracket is ideal with copper since it will minimizes any metal corrosion with copper. Clips directly to inside front gutter lip and back edge of gutter.  Use our #10 x 1-1/2" stainless steel hex head screws with this bracket for easy installation.

Suggested Price . . . . . $7.19

A traditional favorite for hanging 5" K Style copper gutters. The 7" Copper Spike and 5" Copper Ferrule bundled together. Recommended hanger spacing is 24" on centers.  Use with standard five inch K-Style copper gutters.

Spike & Ferrule combination for 5K copper gutter

Suggested Price . . . . . $ 7.99

Use for hanging 5" K Style copper gutter to roof or plywood sheeting. Ideal when there is limited or no fascia. Each hanger bracket has two installation holes for attaching to roof sheathing. Recommended spacing is 16" to 24" on centers.

Suggested Price . . . . $ 18.90

Use for stopping left ends of 5" K Style copper gutter. Made from 16oz. copper. Two required per gutter run. Use Parbond or solder to seal seam.

Suggested Price . . . . . . . $ 7.19

Use for stopping right ends of 5" K Style copper gutter. Made from 16oz. copper. Two required per gutter run. Use Parbond or solder to seal seam.

Suggested Price . . . . . . . $ 7.19

Use the 2" x 3" square 16oz. copper outlet with standard 5" K Style copper gutter. Use for attaching directly to a standard 2" x 3" rectangular copper downspout or elbow.  Use 42D copper pop rivets or #8 x1/2" copper zip screws for attachment to leader.

Fits 5" Standard K-Style gutter systems in copper.

Suggested Price . . . $ 21.00

For joining of our 5" K Style 16oz. copper gutter system at an external or outside corner. This is also know as a box style miter since it allows the installer to make straight simple cuts and overlap gutter with the miter piece.  Also available for internal or inside corners.  To install, fasten copper pop rivets at overlap and seal with Parbond®.  Use a 1.5" overlap.  Many professional installers will solder the seams.

For joining an external 5K Copper Gutter at 90º corner.

Suggested Price . . . . . $ 40.00

For joining of our 5" K Style 16oz. copper gutter system at an internal or inside corner. This is also know as a box style miter since it allows the installer to make straight simple cuts and overlap gutter with the miter piece.  Also available for external or outside corners.  To install, fasten copper pop rivets at overlap and seal with Parbond®.  Many professional installers will solder the seams.

For an internal 5K Copper 90º corner.

Suggested Price . . . . . $ 40.00

Our 2"x3" A style elbow is made from 16oz. copper and fits the standard 2x3 square corrugated downspout. Two elbow required per downspout assembly. A third elbow may be used at bottom on downspout.  See 'Related items' for matching components.  This elbow has a 75º bend.

Bend = 75º  (Standard Bend)

Suggested Price . . . $ 19.90

Use with our 2x3 square corrugated downspout made from same 16oz. Copper.  Typically, two elbows are used to create an offset.  This elbow goes with with a 5" K-Style copper gutter system.  See 'Related items' for matching downspout components.  This elbow is an A-Style and has a 30 degree bend.

Elbow Bend = 30º

Suggested Price . . . $ 19.90

Use the 2"x3" B style elbow with 2"x3" 16oz. copper downpipe. Makes sideway turns for 2"x3" copper pipe. Two elbows required per downspout assembly. A third elbow may be used at bottom of downspout. The B style elbow has a 75º bend.

Suggested Price . . . . . . $ 19.90