Use for attaching copper shanks to our Half Round Circle Hangers in copper.  Depending on installation requirement, our shank enable mounting gutters to slanted fascia, rafter tails, and roof sheeting.  See Shanks for more information. The nut/bolt size is #10-24  Brass Thread x 3/4" Long. Each bag contains 50 brass nuts and bolts.

Use with Copper Shanks; 50 nuts & bolts per bag
 

Suggested price . . . . . . $ 35.00

Use for fascia mounting half round gutter. Requires a #1 Copper Circle Hanger with Spring Clip. Recommended spacing is 24" on centers in plain copper and 16" on centers for lead coated copper.

Suggested Price . . . . . $ 10.00

Use the #6 Copper Shank with #1 Circle with Spring Clip, Nut & Bolt when installing half round gutter to ogee or crown molding. Install shanks and hanger at 24" on centers.

Use for attaching Circle Hanger to crown molding.

Suggested Price . . . $ 27.00

Use for both "K" style and Half Round installation. The #8 Shank for Cornice is made of Malleable Iron. Requires a #1 Circle Galvanized hanger for half round gutter installations. Recommended spacing is 24" on centers.


Suggested Price . . . . . $ 35.00

Requires a 5" or 6" #1 Copper Circle with Spring Clip, Nut & Bolt. Used when installing half round copper gutter. The #10 Copper Shank allows adjustable vertical hang on plumb fascia. Often used with tile and slate roofs with a high roof pitch.

Allow more vertical adjustment.  Steeper roofs with limited fascia.

Suggested price . . . . . $ 16.00

Use the #11 Copper Shank for attaching #1 Circle with Spring Clip, Nut & Bolt to exposed rafter. Made from high grade copper. One shank required per #1 Circle. Recommended spacing is 24" o.c. per hanger.

Side Rafter Mounting Shank

Suggested Price . . . . . $ 18.00

Use for installing copper half round gutter to roof's sheeting/underlayment or plumb rafter bottoms. Shank angle is 1/3 Pitch . Made from high grade copper. Requires a #1 Copper Gem Circle Hanger with Spring Clip.  Hardware not included.  Recommended hanger spacing is 24" o.c.

Use for Roof Mounting to roof with 4/12  or similar pitch
Requires a #1 Copper Circle Gem Hanger 

Suggested Price . . . . . $ 18.00

Use for hanging half round gutter to roof's sheeting. Shank angle is 1/2 Pitch. Requires a #1 Copper Circle Hanger. See Related Products.  Recommended spacing is 24" o.c.

Use for roof mount on 6/12 pitch roof.
Requires #1 Circle Hanger

Suggested Price . . . . . $ 18.00

Use this shank with our #1 Circle Copper Hanger bracket when installing to slated fascia or rafter tails.  One shank is required per hanger bracket. Allows half round gutter to hang plumb when installing directly to either slanted fascia or rafter end. Recommended spacing is 24" o.c.

Slanted Fascia Mounting shank  

Suggested Price . . .  $ 24.00

Each copper shank extension measures 6 ¾". Use to extend shanks when installing "K" Style and Half Round gutter systems with special hanging requirements.

Suggested Price . . . . . $ 15.00

Used for attaching to our #1 Circles in Copper for  all half round gutter sizers.  Use only for installations to plumb fascia.  Using the Shank Plate allows multiple vertical adjustments over using the #10 Combo Circles.  Recommended hanger spacing is 24" on centers.

Copper Shank Face Plate requires a Circle Hanger
 
Suggested Price . . . $ 10.00