Ideal when installing to slanted fascia, rafter tails and roof sheeting.  This bracket requires a galvanized steel shank.  Available shanks include #6 (Ogee/Crown Molding), #10 (lower fascia mount), #11 (Side rafter mount), #12 (Roof Mount with 1/2 Pitch, and # 25 (Roof Pitch with 1/3 Pitch) and #30 (Adjustable for slanted fascia).  Bracket includes a spring clip and nut & bolt.  Recommended spacing is 24 inches on centers.  Mill finish only.

Requires a steel shank; see Related items.

Suggested Price . . . $ 13.50

Use with the #1 Circle with Spring Clip, Nut & Bolt on galvanized steel half round gutter installations where there is limited fascia or tile roofs. The #10 Shank extension allows the #1 Cricle Hanger bracket to be installed lower when mounting to plumb fascia.

Use with limited plumb fascia board installations

Suggested Price . . . . . $ 11.00

Use the #11 Galvanized Steel Shank for nailing to exposed rafters. Requires a #1 Circle with Spring Clip, Nut & Bolt when being used to install half round galvanized steel gutter. Fits either a 4", 5", or 6" #1 Circle. Made of Mill Finish galvanized steel.

Suggested Price . . . . . $ 10.00

Use the #6 Galvanized Steel Shank when installing half round gutter to ogee or crown molding. Requires a #1 Circle with Spring Clip, Nut & Bolt. Mill finish only.

Attaches gutter hanger to fascia with crown molding.

Suggested Price . . . . . $ 12.00

Recommended for securing #1 Half Round Circle hanger brackets to roof's with 1/2 Pitch. Attaches to either 5" or 6" #1 Circles in galvanized with a steel nut and bolt. Recommended shank and hanger spacing is 16" to 24" on centers.

Use for Roof Mounting to Roof's Sheeting

Suggested Price . . . . . $ 10.50