Ideal when installing to slanted fascia, rafter tails and roof sheeting.  This bracket requires a galvanized steel shank.  Available shanks include #6 (Ogee/Crown Molding), #10 (lower fascia mount), #11 (Side rafter mount), #12 (Roof Mount with 1/2 Pitch, and # 25 (Roof Pitch with 1/3 Pitch) and #30 (Adjustable for slanted fascia).  Bracket includes a spring clip and nut & bolt.  Recommended spacing is 24 inches on centers.  Mill finish only.

Requires a steel shank; see Related items.

Suggested Price . . . $ 13.50

Use with the #1 Circle with Spring Clip, Nut & Bolt on galvanized steel half round gutter installations where there is limited fascia or tile roofs. The #10 Shank extension allows the #1 Cricle Hanger bracket to be installed lower when mounting to plumb fascia.

Use with limited plumb fascia board installations

Suggested Price . . . . . $ 11.00

Use the #11 Galvanized Steel Shank for nailing to exposed rafters. Requires a #1 Circle with Spring Clip, Nut & Bolt when being used to install half round galvanized steel gutter. Fits either a 4", 5", or 6" #1 Circle. Made of Mill Finish galvanized steel.

Suggested Price . . . . . $ 10.00

Recommended for securing #1 Half Round Circle hanger brackets to roof's with 1/2 Pitch. Attaches to either 5" or 6" #1 Circles in galvanized with a steel nut and bolt. Recommended shank and hanger spacing is 16" to 24" on centers.

Use for Roof Mounting to Roof's Sheeting

Suggested Price . . . . . $ 10.50

Use for connecting sections of our 6" half round  galvanized steel gutter systems.  Allows installer to join gutter sections together on the same plane making the hydrology of the gutter much better.  Installation is a breeze. Use the #42D steel pop rivets to fasten gutter to slip joint.   See 'Related items' for matching components.  May be sealed with Parbond® (See Sealants) or soldered.

Note:  Easily connects gutter sections together

Suggested Price . . .  $ 11.00