A traditional classic hanger design for classic half round copper gutter system made in the USA.   This hanger is known as the #10 Combo Hanger and is used for mounting half round gutter to plumb fascia boards.  Recommended hanger spacing is 24" on centers.  Includes brass spring clips for attachment to outer half round bead.  This classic design can also be used on 6" Half Round Reverse Bead profiles too.   See 'Related items' for hanger alternatives.

Installs to plumb fascia
Fits 6" Single Bead & Reverse Bead Half Round profiles

Suggested Price . . . $ 34.00

Use for hanging our six inch half round copper gutters on slanted fascia, no fascia, rafter tails, roof sheeting and crown molding scenarios.  Requires a copper shank.  Recommended hanger spacing is 24" on centers or less for roofs prone to snow loads  See 'Related items' for matching shanks and components.  Available copper shanks include needed include #1, #6, #10, #11, #12, #25, and # 30.  

Fits 6" Half Round (Traditional & Reverse Bead)
Do not use with 6" European Half-Round
 

Go to eHelp/Support > Installation >Half Round Hanger Detail PDF for diagram of all shank applications

Suggested Price . . . . . $ 29.00

Use this shank with our #1 Circle Copper Hanger bracket when installing to slated fascia or rafter tails.  One shank is required per hanger bracket. Allows half round gutter to hang plumb when installing directly to either slanted fascia or rafter end. Recommended spacing is 24" o.c.

Slanted Fascia Mounting shank  

Suggested Price . . .  $ 24.00

Use for hanging half round gutter to roof's sheeting. Shank angle is 1/2 Pitch. Requires a #1 Copper Circle Hanger. See Related Products.  Recommended spacing is 24" o.c.

Use for roof mount on 6/12 pitch roof.
Requires #1 Circle Hanger

Suggested Price . . . . . $ 18.00

Use the #11 Copper Shank for attaching #1 Circle with Spring Clip, Nut & Bolt to exposed rafter. Made from high grade copper. One shank required per #1 Circle. Recommended spacing is 24" o.c. per hanger.

Side Rafter Mounting Shank

Suggested Price . . . . . $ 18.00

Requires a 5" or 6" #1 Copper Circle with Spring Clip, Nut & Bolt. Used when installing half round copper gutter. The #10 Copper Shank allows adjustable vertical hang on plumb fascia. Often used with tile and slate roofs with a high roof pitch.

Allow more vertical adjustment.  Steeper roofs with limited fascia.

Suggested price . . . . . $ 16.00

Use the #6 Copper Shank with #1 Circle with Spring Clip, Nut & Bolt when installing half round gutter to ogee or crown molding. Install shanks and hanger at 24" on centers.

Use for attaching Circle Hanger to crown molding.

Suggested Price . . . $ 27.00

Used for attaching to our #1 Circles in Copper for  all half round gutter sizers.  Use only for installations to plumb fascia.  Using the Shank Plate allows multiple vertical adjustments over using the #10 Combo Circles.  Recommended hanger spacing is 24" on centers.

Copper Shank Face Plate requires a Circle Hanger
 
Suggested Price . . . $ 10.00