Use for stopping end of 6" K Style galvanized steel gutter. Fits left side of gutter. Use solder or parbond to seal. Made from 26 gauge galvanized steel. Mill finish only.


Suggested Price . . . $ 4.39

Use for stopping end of 6" K Style galvanized steel gutter. Fits right side of gutter. Use solder or parbond to seal. Made from 26 gauge galvanzied steel. Mill finish only.

Regular price . . . . . . . $ 4.39

Ideal for installing 3x4 downspout to either 5" K Style or 6" K Style galvanized steel gutter systems. Trimmed sides fit to both gutter sizes. Shape is oval which is also ideal for installing either an "A" style or "B" style elbow.  Also available in white. Mill Finish.

Fits all 3x4 Steel Downspouts

Suggested Price . . . $ 7.50

Use for joining the 6" K-Style galvanized gutter at an internal corner.  This box style miter is fabricated from 26g galvanized steel.  The Ogee style miter joins two gutter sections at a 90° inside corner. Unpainted..

Suggested Price . . . $ 39.00

Use for joining the 6" K-Style galvanized gutter at an external corner.  This box style miter is fabricated from 26g galvanized steel.  The Ogee style miter joins two gutter sections at a 90° outside corner. Unpainted.

External Corner/Outside 90º

Suggested Price . . . $ 39.00

Use with 3"x4" square corrugated galvanized steel downspout. This is an "A" Style elbow with a 75º bend. Two elbows are required to bring downspout to wall. A third elbow may be used at bottom of downpipe.  For matching components, see 'Related Items'.

Suggested Price . . . . . $ 10.99

Use for attaching galvanized steel downspout to flat surfaces on an exterior wall.  Ideal for use with wood siding, vinyl siding or wood columns.  Made from galvanized steel. Use an appropriate fastener to attach to wall. Requires a Rack & Key in Galvanized Steel. Two #6 Drives are required per 10 ft. section of downspout.  Three should be used for 2-story downspouts.  See 'Related items' for matching and similar components.

Installs to external wall
Requires Rack & Key 

Suggested Price . . . . . $ 6.90

Use for attaching downspout to an exterior wood siding.  The #4 Drive is used with a Rack and Key to enable downspout to fasten to exterior wall.  Made from galvanized steel.  Use one dive for every rack and key assembly.  Mill finish only.  Also available in copper.  Not available in aluminum.

Requires Rack & Key to install
Use two Drives per single story downspout

Suggested Price . . . $ 3.49